Wohlers Associates Publishes 2013 Report on Additive Manufacturing and 3D Printing, Reveals Trends

U.S. leads the world with the largest installed base of additive manufacturing users, international competition gaining

image-description

FORT COLLINS, COLORADO, USA, May 21, 2013—Wohlers Associates, Inc. today announced the release of the Wohlers Report 2013, the company’s annual in-depth analysis of additive manufacturing (AM) and 3D printing worldwide. The report reveals trends that suggest the U.S. may be losing its competitive advantage in the AM industry.

Wohlers Report 2013 covers all aspects of additive manufacturing, including its history, applications, processes, manufacturers, and materials. It documents important developments from the past 18 months, covers R&D and collaboration activities in government, academia, and industry, and summarizes the state of the industry in countries around the world. This edition marks the report’s 18th consecutive year of publication.

According to the new report, 38% of all industrial AM installations are in the U.S. Japan is second with 9.7%, followed by Germany with 9.4%, and China with 8.7%. Sixteen companies in Europe, seven in China, five in the U.S., and two in Japan now manufacture and sell professional-grade, industrial additive manufacturing systems. “This is a dramatic change from a decade ago, when the mix was ten in the U.S., seven in Europe, seven in Japan, and three in China,” said Tim Caffrey, a principal author of the new report and associate consultant at Wohlers Associates.

To maintain a competitive advantage, the White House launched the National Additive Manufacturing Innovation Institute (NAMII) last year with the support of several agencies, including the Department of Defense. This initiative seeks to accelerate the position of the U.S. in the development and use of AM technology. “It will not be easy, given what organizations in China and other regions of the world have planned,” explained Terry Wohlers, a principal author of the report and president of Wohlers Associates. China, Singapore, South Africa, and many countries in Europe have committed hundreds of millions of dollars in AM development and commercialization over the next few years.

Wohlers Associates’ advice to key leaders in the U.S. is to focus on the big picture with big goals, such as the development of metal-based powder bed fusion systems and other advanced AM system technology. Market forces and competitive pressures will take care of the smaller challenges and incremental technology improvements.

According to Wohlers Report 2013, revenues from all additive manufacturing products and services worldwide were $2.204 billion in 2012. This is up 28.6% (CAGR) from 2011. An estimated 28.3% of the $2.204 billion is tied to the production of parts for final products, rather than models, prototypes, patterns, and other types of parts.

About Wohlers Associates: Wohlers Associates is an independent consulting firm that provides technical, marketing, and strategic advice on the new developments and trends in rapid product development and additive manufacturing. For more information, visit wohlersassociates.com.

About Wohlers Report 2013: The 297-page annual study is packed with up-to-date and practical information. It includes 35 charts and graphs, 55 tables, and more than 200 photographs and illustrations. The report, which sells for US$495, was created with support from 74 service providers, 31 system manufacturers, and the valuable contributions of 70 co-authors from around the world.
Report Development Team
The following individuals and organizations contributed to Wohlers Report 2013
and served as important sources for information.

Nadra Angerman Angerman Communications Group U.S.
Mukesh Agarwala 3D Product Development India
Paulo Jorge Bártolo Institute Polytechnic of Leiria Portugal
Joseph Beaman, Jr. University of Texas at Austin U.S.
Josh Berman William Blair & Company U.S.
Alain Bernard Ecole Centrale de Nantes France
Craig Blue Oak Ridge National Laboratory U.S.
Milan Brandt RMIT University Australia
Craig Brice NASA Langley Research Center U.S.
David Bourell University of Texas at Austin U.S.
Ian Campbell Loughborough University England
William Cass Cantor Colburn U.S.
Andy Christensen Medical Modeling U.S.
Shane Collins Oxford Performance Materials U.S.
Mel Cossette Edmonds Community College U.S.
Frank Cox Edmonds Community College U.S.
Deon de Beer Vaal University of Technology South Africa
Carl Dekker Met-L-Flo U.S.
Olaf Diegel Massey University New Zealand
Brian Drab William Blair & Company U.S.
Igor Drstvenšek University of Maribor Slovenia
Sara Ebright Direct Dimensions U.S.
Pablo Elenter Robtec Brazil
Claus Emmelmann LZN Laser Zentrum Nord Germany
Ismail Fidan Tennessee Tech University U.S.
Tim Gornet University of Louisville U.S.
Joan Guasch Ascamm Spain
Ola Harrysson North Carolina State University U.S.
Seiji Hayano Aspect Japan
Ed Herderick EWI U.S.
Dirk Herzog LZN Laser Zentrum Nord Germany
Forrest Higgs Brosis Innovations U.S.
Neil Hopkinson University of Sheffield England
Luca Iuliano Politecnico di Torino Italy
Jason Jones De Montfort University England
Volker Junior Junior & Tacke Germany
Karolien Kempen Katholieke Universiteit Leuven Belgium
Eric Klemp Direct Manufacturing Research Center Germany
Jannis Kranz LZN Laser Zentrum Nord Germany
Janet Krech Wohlers Associates U.S.
Jean-Pierre Kruth Katholieke Universiteit Leuven Belgium
Tom Kurfess Georgia Institute of Technology U.S.
Feng Lin Tsinghua University China
Ulf Lindhe netfabb Germany
Blake Marshall U.S. Department of Energy U.S.
Wilhelm Meiners Fraunhofer Institute for Laser Technology Germany
Jorge Mireles University of Texas at El Paso U.S.
Ed Morris National Additive Manufacturing Innovation Institute U.S.
Greg Morris GE Aviation U.S.
Tim Mulrooney William Blair & Company U.S.
Erkut Neğiş TurkCADCAM Turkey
Randall Newton Jon Peddie Research U.S.
  John Obielodan   University of Wisconsin–Platteville   U.S.
  Charles Overy   LGM   U.S.
  Joris Peels   Voxelfab   Netherlands
  Michael Raphael   Direct Dimensions   U.S.
  Phil Reeves   Econolyst   England
  Alex Rekout   Moscow Business College #11   Russia
Stephen Rouse Medical Applications of Additive Manufacturing U.S.
Jeff Rowe Cairowest Group U.S.
Kevin Scanlan Anubis Manufacturing Consultants Corp. Canada
Joel Segal University of Nottingham England
Michael Siemer Innovative Medical Device Solutions U.S.
Chris Spadaccini Lawrence Livermore National Laboratory U.S.
Jürgen Stampfl Vienna University of Technology Austria
Ian Stewart Wilson Elser Moskowitz Edelman & Dicker U.S.
Brent Stucker University of Louisville U.S.
Jukka Tuomi Aalto University Finland
Bart van de Vorst TNO Netherlands
Juan Vargas University of Texas at El Paso U.S.
Marius Vermeulen Aerosud South Africa
Andreas Wegner University of Duisburg–Essen Germany
Ryan Wicker University of Texas at El Paso U.S.
David Wimpenny Manufacturing Technology Centre England
Gerd Witt University of Duisburg–Essen Germany

Related Posts

3D Printing in Australia

June 21, 2015

Last month, the Australian government announced the funding of a new program that could give 3D printing and additive manufacturing…

Wohlers Associates, powered by ASTM International, and America Makes to Offer Design for Additive Manufacturing Course

June 7, 2022

FORT COLLINS, Colo., and YOUNGSTOWN, Ohio, June 7, 2022—Wohlers Associates and America Makes are partnering to offer a three-day design…

A Milestone for the Industry

February 5, 2004

Almost before the “ink” was dry on the January 31, 2004 commentary titled Chief Executive is Good for 3D Systems, I received…

Learn more about ASTM and AM CoE

ASTM unites with the Wohlers brand to build on its market influence and access to top AM industry decision-makers worldwide.

  • Establish standards, certification, and qualification for repeatable, consistent parts and processes
  • Prevent gaps and duplication of work in a dynamic, fast-paced technology space
  • Identify challenges that can be solved with technological improvement

Research and Development

Under the leadership of the R&D team, the AM CoE partners plan and conduct coordinated R&D projects, prioritized annually and targeted to expedite...

Learn More

Education and Workforce Development

Provide a comprehensive program that educates and trains the additive manufacturing workforce at all levels, while continually incorporating new advances...

Learn More