Report Development Team

The following 80 individuals and organizations in 33 countries contributed to Wohlers Report 2016 and served as important sources for information.

Mukesh Agarwala	3D Product Development	India
Nuno Alves	Polytechnic Institute of Leiria	Portugal
Nic Balc	Technical University of Cluj–Napoca	Romania
Joseph Beaman, Jr.	University of Texas at Austin	U.S.
Tyler Benster	Azavy	U.S.
Alain Bernard	Ecole Centrale de Nantes	France
Klas Boivie	SINTEF	Norway
Gerrie Booysen	Central University of Technology	South Africa
Paul Boulware	EWI	U.S.
Bob Bradley	RJ Bradley Consulting	England
Milan Brandt	RMIT University	Australia
Graham Bredemeyer	Reality AM Partners	U.S.
David Bourell	University of Texas at Austin	U.S.
William Cass	Cantor Colburn	U.S.
Grigory Chuyko	Voronezhselmash	Russia
Mel Cossette	Edmonds Community College	U.S.
Deon de Beer	North-West University	South Africa
Ryan Dehoff	Oak Ridge National Laboratory	U.S.
Carl Dekker	Met-L-Flo	U.S.
Olaf Diegel	Lund University and Wohlers Associates	Sweden
Brian Drab	William Blair & Company	U.S.
Igor Drstvenšek	University of Maribor	Slovenia
Sara Ebright	Direct Dimensions	U.S.
Khalid Abdel Ghany	Central Metallurgical R&D Institute	Egypt
Ismail Fidan	Tennessee Tech University	U.S.
Jennifer Fielding	Air Force Research Laboratory	U.S.
Tim Gornet	University of Louisville	U.S.
Joan Guasch	Ascamm	Spain
Seiji Hayano	Aspect	Japan
Robert Honiball	CustomMed	Namibia
Brecht Van Hooreweder	KU Leuven	Belgium
Neil Hopkinson	University of Sheffield	England
John Hornick	Finnegan, Henderson, Farabow, Garrett & Dunner	U.S.
Olivier Jay	Danish Technological Institute	Denmark
Jeng Ywan Jeng	National Taiwan University of Science and Tech.	Taiwan
Chua Chee Kai	Nanyang Technological University	Singapore
Ingomar Kelbassa	Siemens AG	Germany
Shawn Kelly	EWI	U.S.
Andrzej Kęsy	University of Technology and Humanities, Radom	Poland
Babak Kianian	Lund University	Sweden
Alex Kingsbury	CSIRO	Australia
Eric Klemp	Voestalpine	Germany
Joseph Kowen	Oryx Business Development	Israel
Jean-Pierre Kruth	KU Leuven	Belgium
Martin Lavoie	Canada Makes	Canada
Nak‐Kyu Lee	Korea Institute of Industrial Technology	Korea
Jörg Lenz	EOS	Germany
Feng Lin	Tsinghua University	China
Simon Marriott	Adv. Mfg. Cooperative Research Centre	Australia
Artur Mateus	Polytechnic Institute of Leiria	Portugal
Ed Morris	America Makes	U.S.
Greg Morris	GE Aviation	U.S.
Randall Newton	Consilia Vektor	U.S.
Giorgos Nikoleris	Lund University	Sweden
Axel Nordin	Lund University	Sweden
John Obielodan	University of Wisconsin–Platteville	U.S.
Artur Olszak	New Chemical Syntheses Institute	Poland
Charles Overy	LGM	U.S.
Bene Padovani	Additiive Manufacturing Consultancy	Brazil
Joris Peels	Voxelfab	Netherlands
Burak S. Pekcan	+90	Turkey
Michele Perino	Cantor Colburn	U.S.
Johan Potgieter	Massey University	New Zealand
Michele Pressacco	Lima Corporate	Italy
Michael Raphael	Direct Dimensions	U.S.
Marco Regis	Lima Corporate	Italy
Boris Salamakhin	Voronezhselmash	Russia
Joel Segal	University of Nottingham	England
Jorge Silva	Renato Archer Information Technology Center	Brazil
Zach Simkin	Senvol	U.S.
Mark Smith	Sandia National Laboratories	U.S.
Chris Spadaccini	Lawrence Livermore National Laboratory	U.S.
Jürgen Stampfl	Vienna University of Technology	Austria
Brent Stucker	3DSIM	U.S.
Jukka Tuomi	Aalto University	Finland
Annie Wang	Senvol	U.S.
Robert Wells	Finnegan, Henderson, Farabow, Garrett & Dunner	U.S.
Ryan Wicker	University of Texas at El Paso	U.S.
Julie Whitney	Wohlers Associates	U.S.
Naiara Zubizarreta	AddiMAT	Spain

Order form and table of contents. Order your report today!