Wohlers Report

Wohlers Report 2019

Additive Manufacturing and 3D Printing State of the Industry
ISBN 978-0-9913332-5-7

Report Development Team

The following 80 individuals and organizations in 32 countries contributed to Wohlers Report 2019 and served as important sources for information.

Principal authors:

Ian Campbell, Wohlers Associates, Inc. (UK)
Olaf Diegel, Wohlers Associates, Inc. (Sweden)
Ray Huff, Wohlers Associates, Inc. (U.S.)
Joseph Kowen, Wohlers Associates, Inc. (Israel)
Terry Wohlers, Wohlers Associates, Inc. (U.S.)

Associate authors:

David Bourell, University of Texas at Austin (U.S.)
Ismail Fidan, Tennessee Tech University (U.S.)
Peter Sander, Airbus (Germany)


Mukesh Agarwala 3D Product Development India
Nuno Alves Polytechnic Institute of Leiria Portugal
Nicolae Balc Technical University of Cluj–Napoca Romania
Mark Barfoot EWI U.S.
Alain Bernard Ecole Centrale de Nantes France
Kris Binon Flam3D Belgium
Klas Boivie SINTEF Norway
Gerrie Booysen Central University of Technology South Africa
Paul Boulware EWI U.S.
David Brackett Manufacturing Technology Centre UK
Milan Brandt RMIT University Australia
Andy Christensen Somaden LLC U.S.
Chee Kai Chua Nanyang Technological University Singapore
Mel Cossette Edmonds Community College U.S.
Mads Kjøller Damkjær Danish AM Hub Denmark
Deon de Beer Central University of Technology South Africa
Frank Defalco Canada Makes Canada
Carl Dekker Met-L-Flo U.S.
Shawn Dirk Sandia National Laboratories U.S.
Thierry Dormal Sirris Belgium
Brian Drab William Blair & Company U.S.
Igor Drstvenšek University of Maribor Slovenia
Sara Ebright Direct Dimensions U.S.
Khalid Abd Elghany Central Metallurgical R&D Institute Egypt
Claus Emmelmann Fraunhofer IAPT Germany
Arno Ferreira University of Auckland New Zealand
Elizabeth Ferrill Finnegan, Henderson, Farabow, Garrett & Dunner U.S.
Matthew Friedell United States Marine Corps U.S.
Rob Gorham America Makes U.S.
Tim Gornet University of Louisville U.S.
Michael Hickner Pennsylvania State University U.S.
Jeng Ywan Jeng National Taiwan Univ. of Science and Tech. Taiwan
Carsten Keunhndel NATO U.S.
Andrzej Kęsy University of Technology and Humanities Poland
Malika Khodja TIZIRI South Africa
Babak Kianian Lund University Sweden
Philipp Kohlwes Fraunhofer IAPT Germany
Art Kracke AAK Consulting U.S.
Jörg Lenz EOS GmbH Germany
Feng Lin Tsinghua University China
Christian Lindemann Direct Manufacturing Research Center Germany
Giorgio Magistrelli MCI Group Belgium
Simon Marriott Adv. Mfg. Cooperative Research Centre Australia
Artur Mateus Polytechnic Institute of Leiria Portugal
Hein Moller TIZIRI South Africa
Tom Mueller Mueller AMS U.S.
Randall Newton Consilia Vektor U.S.
Hideaki Oba 3D Printing Industry Technology Association Japan
John Obielodan University of Wisconsin–Platteville U.S.
Charles Overy LGM U.S.
Bene Padovani Additive Manufacturing Consultancy Brazil
Joris Peels Voxelfab Netherlands
Burak S. Pekcan +90 Turkey
William Peter Oak Ridge National Laboratory U.S.
Sebastian Piegert Siemens AG Germany
Michele Pressacco LimaCorporate Italy
Michael Raphael Direct Dimensions U.S.
Boris Salamakhin Independent Russia
Elisa Salatin LimaCorporate Italy
Mika Salmi Aalto University Finland
Marco Salvisberg Precicast Additive Switzerland
Christian Seidel Fraunhofer IGCV Germany
Mike Siemer The Walt Disney Company U.S.
Jorge Silva Renato Archer Information Technology Center Brazil
Aidan Skoyles Finnegan, Henderson, Farabow, Garrett & Dunner U.S.
Kinga Skrzek University of Technology and Humanities Poland
Chris Spadaccini Lawrence Livermore National Laboratory U.S.
Jürgen Stampfl Vienna University of Technology Austria
Riccardo Toninato LimaCorporate Italy
Nicole Wake Montefiore Medical Center U.S.
David Wimpenny Manufacturing Technology Centre UK
Naiara Zubizarreta AddiMAT Spain

Order form and table of contents. Order your report today!