Blog Menu

How to Design for Additive Manufacturing

April 22, 2017

Filed under: 3D printing,additive manufacturing,CAD/CAM/CAE,event,manufacturing — Terry Wohlers @ 08:40

It is critical for organizations to take a number of factors into account when considering the use of 3D printing for part manufacturing. Among the most important is design for additive manufacturing (DfAM). It can make the difference between success and failure. DfAM focuses on methods and special software that are unique to AM processes, such as the digital consolidation of many parts into one. This can result in significant savings in manufacturing processes, part numbers, material, weight, assembly, labor, inventory, and certification paperwork.

Wohlers Associates is partnering with Materialise to offer a three-day course on DfAM. Materialise is an industry-leading provider of 3D printing software and services. The course is May 31 – June 2, 2017 at the Materialise headquarters location in Leuven, Belgium. Wohlers Associates has twice offered a similar course on DfAM for NASA Marshall Space Flight Center, which received high marks for its effectiveness.

The upcoming course will provide expert instruction on methods of DfAM. It will include topology optimization, a technique of letting mathematics decide where to place material to optimize the strength-to-weight ratio. It can result in organic and “bionic” structures that reduce material and weight by up to 60%, while preserving strength. The following example is a hydraulic manifold for an Airbus A380 spoiler, a wing device that slows or causes an airplane to descend. The version on the left is a conventionally-machined manifold. The one on the right was redesigned using methods of DfAM and produced by AM. It flew on the A380 in March 2017. The AM version reduced weight by 55%—a significant benefit in aircraft manufacturing.

Participants will gain valuable hands-on experience by designing parts using CAD and special software tools for additive manufacturing. Some of the designs will be built on industrial AM equipment at Materialise so that attendees can evaluate the results. 3D scanning for custom product development will be included as an exercise that was popular among NASA engineers.

Associate consultant Olaf Diegel, PhD, will serve as the lead instructor. His rare combination of experience with both conventional design and manufacturing and DfAM makes him one of very few people capable of leading quality DfAM instruction and hands-on learning. Olaf has created more than 80 commercial products and is an engaging instructor, making him ideal for the course. The people at NASA had nothing but great things to say about him.

Click here for details on the course.

22nd Annual Wohlers Report

April 8, 2017

Filed under: 3D printing,additive manufacturing,CAD/CAM/CAE,manufacturing — Terry Wohlers @ 16:08

I’m happy to announce this week’s publication of Wohlers Report 2017. I sure wish that after so many years, it would become easier. It does not, mostly because of all the change and new developments in additive manufacturing and 3D printing. The annual effort is still very much related to the technology, but over time, it becomes as much or more about people. Our international network of friends, associates, and business contacts is what makes the report possible. We believe it is the largest and most developed network of its kind.

Our team is responsible for producing what I believe is the best edition of the report in more than two decades of publishing it. Associate consultants and principal authors Ian Campbell, Olaf Diegel, and Joseph Kowen carried much of the weight. With already very demanding schedules, each of them knew what needed to be done and delivered. In my view, they exceeded the standard of quality that customers and readers of the report have come to expect. They are real pros and it is a privilege to work with each of them.

Associate authors Dave Bourell and Ismail Fidan also played key roles. Year after year, they have contributed in ways that may not be fully appreciated by some. Both stepped up their involvement this year and I could not be happier with their efforts. Jenny van Rensburg, most recently at Central University of Technology, with continued involvement in the Rapid Product Development Association of South Africa, served as editor and proof reader. Thank you, Jenny, for all of the hard work.

I’m also very appreciative of executive assistant Julie Whitney for handling the details associated with the orders we receive, not to mention almost everything else in the office. Also, I want to thank my wife, Diane, for handling the accounting, and for tolerating me during a challenging time. Without them, the business would not be what it is today. A special thanks to Craig Van Wechel for his outstanding graphics design work year after year, including the cover pictured above, and to Jason Norris for his contribution to our web pages. Thanks to Dan Silva, our IT guy, for his expert support.

And finally, my sincere thanks to the 76 co-authors and contributors in 31 countries that wrote important sections of the report. I appreciate everyone that played a part in producing and delivering Wohlers Report 2017. In just four days of sales, it has been sent to customers in 24 countries on four continents around the world.