Blog Menu

SME’s RAPID 2016

May 21, 2016

I attended this week’s RAPID 2016 in Orlando, Florida. As usual, the conference and exposition were excellent. An estimated 5,190 attended the event, compared to 4,512 last year. Exhibit space increased to 4,153 sq meters (44,700 sq ft), up from 2,903 sq meters (31,250 sq ft) last year. The following are a few highlights of the event:

● HP introduced and showed its Jet Fusion 3200 and 4200 3D printers for the first time publicly. The machines are capable of addressing 340 million voxels per second in thermoplastic materials, such as PA12. They are 10 times faster and operate at half the cost of competitive systems, according to HP. The systems are mostly open, which means they support third-party materials at competitive prices.

heart

● Renishaw showed its new RenAM 500M machine that produces metal parts. The engineering is impressive. Meanwhile, 3D Systems displayed its new ProX DMP 320 machine for producing metal parts. It is based on technology developed by Belgium-based LayerWise, which was acquired by 3D Systems in 2014.

● Xjet of Israel introduced its NanoParticle Jetting technology. It uses inkjet printing to produce parts in stainless steel and silver. The parts are small, but the feature detail is good.

● Event organizer SME hosted a fashion show that featured entirely new 3D-printed designs. Many were impressive. I have now attended five fashion shows that highlight 3D-printed products and it’s remarkable how far the designs have advanced in a few years.

fashion-show

Congrats to SME for another great event, which continues to improve year after year. With increasing applications of additive manufacturing and 3D printing for final part production, the event has the opportunity to grow much larger in the future.

RAPID 2017 will be held May 8-11 in Pittsburgh, Pennsylvania. Add it to your calendar and plan to attend.

Premium AEROTEC

May 6, 2016

Filed under: 3D printing,additive manufacturing,event — Terry Wohlers @ 09:30

Last week, I visited Premium AEROTEC, a 10,000-employee company that is 100% owned by Airbus. The company has several locations in Germany, including Varel, the site that I visited. This is where Premium AEROTEC has installed its first four metal additive manufacturing machines, including the large X line 1000R system from Concept Laser. It served as the backdrop for the stage, as shown in the following picture. The machine was running, along with two M2 machines from Concept Laser during the one-day event. The large machine is being swapped for the newer X line 2000R later this month.

premium-aerotec

Premium AEROTEC is serving a key role in the series production of AM parts for cabin, fuselage, and other systems for Airbus. The approval by the authorities for air worthiness, a major milestone, was achieved in March 2016. Thus far, Premium AEROTEC has secured suppliers with total capacity of about 40 metal AM machines. Companies, such as Materialise, have set up manufacturing facilities nearby and are buying metal AM equipment with the hope of serving as a supplier. I had the chance to visit the new Materialise AM production facility in Bremen and was impressed by what’s already in place, coupled with its near-future growth plans. Many more machines will need to be added to the Airbus supply chain for it to meet its goal of producing 30 tons of metal AM parts monthly by December 2018.

More than 100 people attended the special Premium AEROTEC event. I was asked to speak on the state of the additive manufacturing industry and provide highlights and details from the recently published Wohlers Report 2016. I spoke 70 minutes to an enthusiastic crowd, followed by questions from many people in the room. Click here if you are interested in reading a recent article on Premium AEROTEC and the April 26 event.

Peter Sander, Head of Emerging Technologies & Concepts at Airbus, was my host during my stay in Bremen and Hamburg. The day after visiting Premium AEROTEC, Peter arranged to have me speak to a group of about 150 Airbus employees in Hamburg. The one-hour presentation was also broadcast live to an additional 150 people at Airbus sites in Bremen (Germany), Toulouse (France), Getafe (Spain), and Filton (UK). I was surprised but happy to see so many young people in the audience, several of which introduced themselves to me after the presentation. I could tell that they are clearly very excited about the potential of AM. The presentation was held in the new and impressive ZAL Center of Applied Aeronautical Research at Airbus, which is pictured below.

zal

My time in Germany could not have gone better, thanks to Peter Sander and his team. Thanks also to Dr. Thomas Ehm, Chairman of Premium AEROTEC, and Gerd Weber, Site Manager for the Varel location, for their warm welcome and kind words. They rolled out the red carpet for my visit and I appreciate it very much.