Magazine and Journal Articles

Part 1 of 2 1984-1991


Wohlers, Terry T. Dedicated vs. Casual Users, and the Programmability of CAD Software, Input/Output Column, MCN, Vol. 6, No. 12, December 1991

Wohlers, Terry T. Advances in Rapid Prototyping, Computer Graphics World, Vol. 14, No. 12, December 1991

Wohlers, Terry T. Guidelines for Rapid Prototyping Success, Rapid Prototyping Report, Vol. 1, No. 6, November 1991

Wohlers, Terry T. The Real Cost of Rapid Prototyping, Manufacturing Engineering, Vol.107, No. 5, November 1991

Wohlers, Terry T. Input Devices and Rapid Prototyping, Input/Output Column, MCN, Vol. 6, No. 11, November 1991

Wohlers, Terry T. Viewports and Paper Space, CADENCE, Vol. 6, No. 12, December 1991

Wohlers, Terry T. Solid Modeling Is Not All There Is, CADENCE, Vol. 6, No. 11, November 1991

Wohlers, Terry T. The Use of Intel-based Computers, CAD and Microsoft Windows, Input/Output Column, MCN, Vol. 6, No. 10, October 1991

Wohlers, Terry T. Modifying Solid Composites, CADENCE, Vol. 6, No. 10, October 1991

Wohlers, Terry T. AME Boolean Operations, CADENCE, Vol. 6, No. 9, September 1991

Wohlers, Terry T. Solid Modeling and the Generation of Paper Documents, Input/Output Column, MCN, Vol.6, No. 9, September 1991

Wohlers, Terry T. AME Solid Primitives, CADENCE, Vol. 6, No. 8, August 1991

Wohlers, Terry T. CAD on the Desktop: 1977 - 1991 Milestones, Computer Graphics World, Vol. 14, No. 8, August 1991

Wohlers, Terry T. 2001 - The Future is Closer Than You Think, CADENCE, Vol. 6, No. 8, August 1991

Wohlers, Terry T. AME Solids and Surfaces: A Comparison, CADENCE, Vol. 6, No. 7, July 1991

Wohlers, Terry T. Input Devices, Input/Output Column, MCN, Vol.6, No. 7, July 1991

Wohlers, Terry T. CAD Platforms, Input/Output Column, MCN, Vol. 6, No. 6, June 1991

Wohlers, Terry T. An Introduction to AME: The Solid Model and AMElite, CADENCE, Vol. 6, No. 6, June 1991

Wohlers, Terry T. CAD Networking and the Casual User, Input/Output Column, MCN, Vol. 6, No. 5, May 1991

Wohlers, Terry T. Sixth International Forum Goes to England, CADENCE, Vol. 6, No. 5, May 1991

Wohlers, Terry T. Solid Modeling on the Desktop, Input/Output Column, MCN, Vol. 6, No. 4, April 1991

Wohlers, Terry T. AutoShade Gets Real with RenderMan, Offers Photorealistic Enhancements, InfoWorld, Vol. 13, No. 19, May 13, 1991

Wohlers, Terry T. MicroCADD: A Dynamic Segment of the CAD Marketplace, Computer Graphics World, Vol. 14, No. 4, April 1991

Wohlers, Terry T. 3-D Prototyping Systems Streamline, Improve Design, Computer Graphics Times, March 1991

Wohlers, Terry T. CADAM Tries 3D on a PC, Computer Graphics World, Vol. 14, No. 3, March 1991

Wohlers, Terry T. Playing to Win, Autodesk and SDRC Agree to Agree, CADENCE, Vol. 6, No. 3, March 1991

Wohlers, Terry T. Desktop Operating Environments, Input/Output Column, MCN, Vol. 6, No. 3, March 1991

Wohlers, Terry T. Make Fiction Fact Fast, Roundup of Rapid Prototyping Systems ranging from Stereolithography to 3-D Printing, Manufacturing Engineering, Vol. 106, No. 3, March 1991

Wohlers, Terry T. Networking, MicroCAD Reader Survey, MCN (formally MicroCAD News), Vol. 6, No. 2, February 1991

Wohlers, Terry T. Software Solutions: Network and Drawing File Management Problems, CADENCE, Vol. 6, No. 1, January 1991

Wohlers, Terry T. What's Ahead for Autodesk? Multimedia, Cyberspace, and Xanadu on the Horizon, CADENCE, Vol. 5, No. 12, December 1990

Wohlers, Terry T. Solid Future on the PC?, Computer Graphics World, Vol. 13, No. 11, November 1990

Wohlers, Terry T. NCGA MicroCADD News, MicroCAD News, Vol. 5, No. 11, November 1990

Wohlers Terry T. Planning to Attend Autofact '90?, CADENCE, Vol. 5, No. 11, November 1990

Wohlers, Terry T. Radius QuickCAD, MicroCAD News, Vol. 5, No. 10, November 1990

Wohlers, Terry T. Is DOS Dead?, CADENCE, Vol. 5., No. 10, October 1990

Wohlers, Terry T. Is Drafting a Dying Dinosaur? Automation Mandates Evolution, CADENCE, Vol. 5, No. 9, September 1990

Wohlers, Terry T. Networking and Control, CADENCE, Vol. 5., No. 8, August 1990

Wohlers, Terry T. Plastic Models in Minutes, CADENCE, Vol. 5, No. 7, July 1990

Wohlers, Terry T. Ease of Drafting: Ashlar's Vellum Software for 2D CAD Snaps into the Marketplace with a Unique Drafting Feature, Computer Graphics World, Vol. 13, No. 6, June 1990

Wohlers, Terry T. Report Confirms AutoCAD Dominance, CADENCE, Vol. 5, No. 6, June 1990

Wohlers, Terry T. Applying AutoCAD 3-D Fundamentals, Part II, Architectural & Engineering Systems, Vol. 6, No. 6, June 1990

Wohlers, Terry T. The Need for Second-Generation Industry-Education Partnerships, NCGA Forum, Vol.1, No. 3, May/June 1990

Wohlers, Terry T. Parametric Design With OS/2, CADENCE, Vol. 5, No. 5, May 1990

Wohlers, Terry T. Applying AutoCAD 3-D Fundamentals, Part I, Architectural & Engineering Systems, Vol. 6, No. 5, May 1990

Wohlers, Terry T. Automating the Drafting & Design Office, Technology Education Update, Glencoe/McGraw-Hill, Spring 1990

Wohlers, Terry T. Factors Working For & Against OS/2, CADENCE, Vol. 5, No. 4, April 1990

Wohlers, Terry T. Examining OS/2, CADENCE, Vol. 5, No. 3, March 1990

Wohlers, Terry T. Practical Prototypes, Computer Graphics World, Vol. 13, No. 3, March 1990

Wohlers, Terry T. CADNET Systems' Operations Manager, CADENCE, Vol. 5, No. 2, February 1990

Wohlers, Terry T. AutoCAD and AutoSolid: Software in Transition, Technical Education News, Vol. 49, No. 1, Winter 1990

Wohlers, Terry T. A Mac Test Drive: Evaluating the new Mac IIci as a CAD platform, Computer Graphics World, Vol. 13, No. 1, January 1990

Wohlers, Terry T. Performance Enhancing on the Mac: Compaq vs. Mac, CADENCE, Vol. 5, No. 1, January 1990

Wohlers, Terry T. UNIX-Based CAD, Architectural & Engineering Systems, Vol. 5, No. 11, November 1989

Wohlers, Terry T. Autodesk's New Marketing Strategy: The Merging of AutoCAD and AutoSolid, CADENCE, Vol. 4, No. 11, November 1989

Wohlers, Terry T. Engineering Data Management Systems, Part II: How Novell and 10CAD EDMS Integrate an AutoCAD Work Environment, CADENCE, Vol. 4, No. 10, October 1989

Wohlers, Terry T. The 10CAD EDMS, Part I: An Engineering Data Manager That Works with the Novell Network, CADENCE, Vol. 4, No. 9, September 1989

Wohlers, Terry T. Environmental Awareness: Choice of Operating Environment Plays a Growing Role in CADD Buying Decisions, Computer Graphics World, Vol. 12, No. 8, August 1989

Wohlers, Terry T. 3D Wireframe Modeling: Obstacles in Creating a 3D Architectural Model, CADENCE, Vol. 4, No. 8, August 1989

Wohlers, Terry T. The Design Firm of the 90s, Architectural & Engineering Systems, Vol. 5, No. 7, July 1989

Wohlers, Terry T. Will Users Take the RISC?, CADENCE, Vol. 4, No. 7, July 1989

Wohlers, Terry T. Does the 3D Market Exist?, CADENCE, Vol. 4, No. 6, June 1989

Wohlers, Terry T. The Benefits of Display List Processing, Architectural & Engineering Systems, Vol. 5, No. 6, June 1989

Wohlers, Terry T. A Taste of the Macintosh, CADENCE, Vol. 4, No. 5, May 1989

Wohlers, Terry T. Need a New Career?, Computer Graphics World, Vol. 12, No. 5, May 1989

Wohlers, Terry T. Creating Parts by Layers: 3D Presentation Output with SLA, SLS, LOM and BPM, CADENCE, Vol. 4, No. 4, April 1989

Wohlers, Terry T. Considering PC CADD?, Design Management, Vol. 13, No. 4, April 1989

Wohlers, Terry T. 3D Hard Copy: Sintering, StereoLithography and Other Scintillating Subjects, CADENCE, Vol. 4, No. 3, March 1989

Wohlers, Terry T. AutoLISP Utilities, CADENCE, Vol. 4, No. 2, February 1989

Wohlers, Terry T. The Push for Operating System Standards, CADENCE, Vol. 4, No. 1, January 1989

Wohlers, Terry T. Communicating in Print: Resources for Manual Preparation and Production, CADENCE, Vol. 3, No. 12, December 1988

Wohlers, Terry T. Installing a CAD-Based Network, CADENCE, Vol. 3, No. 11, November 1988

Wohlers, Terry T. Going Up? Manufacturer Installs Ethernet Network, CADalyst, Vol. 5, No. 9, November 1988

Wohlers, Terry T. Linking it All Up, Computer Graphics World, Vol. 11, No. 11, November 1988

Wohlers, Terry T. The Real Impact of Release 10, CADENCE, Vol. 3, No. 10, October 1988

Wohlers, Terry T. A Solid Challenge, Computer Graphics World, Vol. 11, No. 9, September 1988

Wohlers, Terry T. Twenty-Five Years of FEA Success: The MacNeal-Schwendler Corporation, CADENCE, Vol 3, No. 9, September 1988

Wohlers, Terry T. Only a Matter of Time, CAD/CAM Journal, Vol. 2, No. 2, August/ September 1988

Wohlers, Terry T. Running OS/2 On Compaq's 386/20, CADENCE, Vol. 3, No. 8, August 1988

Wohlers, Terry T. VersaCAD on the Mac, Computer Graphics World, Vol. 11, No. 7, July 1988

Wohlers, Terry T. Installing OS/2 on Compaq's 386/20, CADENCE, Vol. 3, No. 7, July 1988

Wohlers, Terry T. PCs Versus Workstations, Architectural & Engineering Systems, Vol. 4, No. 2, June 1988

Wohlers, Terry T. Strengthening the Link Between Man and Machine, CADENCE, Vol. 3, No. 6, June 1988

Wohlers, Terry T. 3D Printing: From CADD Model to Prototype, Computer Graphics World, Vol. 11, No. 5, May 1988

Wohlers, Terry T. Applying Parametrics, CADENCE, Vol. 3, No. 5, May 1988

Wohlers, Terry T. Presenting AutoCAD: 35mm Slides, CADENCE, Vol. 3, No. 4, April 1988

Wohlers, Terry T. Presenting AutoCAD: The Standard Overhead Projector, CADENCE, Vol. 3, No. 3, March 1988

Wohlers, Terry T. More CADD On Personal Computers, Computer Graphics Today, Vol. 5, No. 3, March 1988

Wohlers, Terry T. The Leap to 3D, Computer Graphics World, Vol. 11, No. 3, March 1988

Wohlers, Terry T. Command Performance: Fifteen Tips for Learning AutoCAD, CADENCE, Vol. 3, No. 2, February 1988

Wohlers, Terry T. CAD '88, Architectural & Engineering Systems, Vol. 3, No. 7, January 1988

Wohlers, Terry T. Planning Kodak Facilities With Icon Menus, CADENCE, Vol. 3, No. 1, January 1988

Wohlers, Terry T. AutoSketch (a product review), PC Magazine, Vol. 6, No. 21, December 8, 1987

Wohlers, Terry T. Command Performance, CADENCE, Vol. 2, No. 12, December 1987

Wohlers, Terry T. Introduction to Low-Cost 32-Bit Platforms for VersaCAD, Versatility, Vol. 1, No. 4, November 1987

Wohlers, Terry T. AutoCAD's New Slide Library Facility, CADENCE, Vol. 2, No. 11, November 1987

Wohlers, Terry T. AutoSketch: An Excellent Introduction to AutoCAD Release 9, CADENCE, Vol. 2, No. 11, November 1987

Wohlers, Terry T. Loading for Peak Performance, CADENCE, Vol. 2, No. 10, October 1987

Wohlers, Terry T. Kodak Datashow System (a product review), CADENCE, Vol. 2, No. 10, October 1987

Wohlers, Terry T. Layering AutoCAD Drawings, CADENCE, Vol. 2, No. 9, September 1987

Wohlers, Terry T. IBM's Personal System/2, Versatility, Vol. 1, No. 3, September 1987

Wohlers, Terry T. Hard Disk Management, CADENCE, Vol. 2, No. 8, August 1987

Wohlers, Terry T. CADD Catches 32-Bit Wave, Computer Graphics World, Vol. 10, No. 6, June 1987

Wohlers, Terry T. Creating a Custom Tablet Menu, CADENCE, Vol. 2, No. 6, June 1987

Wohlers, Terry T. 35mm Slides with VersaCAD, Versatility, Vol. 1, No. 2, July 1987

Wohlers, Terry T. Bell & Howell CDI IV Film Recorder (a product review), CADENCE, Vol. 2, No. 5, May 1987

Wohlers, Terry T. Slide Show Production, CADENCE, Vol. 2, No. 5, May 1987

Wohlers, Terry T. Micros Dominate NCGA's Graphics '87, MicroCAD News (premiere issue), May 1987

Wohlers, Terry T. Exploring NC Options, MicroCAD News (premiere issue), May 1987

Wohlers, Terry T. Bringing CADD to an Audience, Computer Graphics World, Vol. 10, No. 4, April 1987

Wohlers, Terry T. Spending Too Much Time Scaling Drawings?, CADENCE, Vol. 2, No. 4, April 1987

Wohlers, Terry T. Computing by Menus: Developing Disk Management Menus, Versatility (premiere issue), Vol. 1, No. 1, May 1987

Wohlers, Terry T. AutoCAD Training Versus Individual Discovery: A Cost Comparison, CADENCE, Vol. 2, No. 3, March 1987

Wohlers, Terry T. Creating Symbol Libraries: A Step-by-Step Case Study, CADENCE, Vol. 2, No. 2, February 1987

Wohlers, Terry T. Creating and Reporting Attributes (Part II), CADENCE, Vol. 2, No. 1, January 1987

Wohlers, Terry T. Creating and Reporting Attributes (Part I), CADENCE, Vol. 1, No. 6, December 1986

Wohlers, Terry T. Version 2.5 [AutoCAD] Enhancements Prove Practical, CADENCE, Vol. 1, No. 5, November 1986

Wohlers, Terry T. Turning Your Vanilla PCs Into CAD Workstations, CADENCE, Vol. 1, No. 4, October 1986

Wohlers, Terry T. Micro-CADD Offers Array of Innovative Applications, Computer Graphics Today, Vol. 3, No. 6/7, June/July 1986

Wohlers, Terry T. Micro-based CAD: Powerful Features at Low Cost, Computer Graphics Today, Vol. 2, No. 6, June 1985

Wohlers, Terry T. and Walker, Jerry P. Establishing a Micro-CAD Capacity in a University Environment: Cautions and Conundrums, CADalyst Journal, Vol. 2, No. 2, March/April 1985

Wohlers, Terry T. The Phenomenal Promise of Micro-Based CAD, Computer Graphics World, February 1985

Wohlers, Terry T. Experimental CAD Course Uses Low-Cost Systems, Technological Horizons in Education (T.H.E.) Journal, Vol. 12, No. 3, October 1984